ProForm 515 Zlt English Manual - Page 13

13. Orient the Storage Latch (84) so that the decals are facing away from the treadmill as shown. 13 Attach the lower end of the Storage Latch (84) to the Base (74) with an M8 x 45mm Bolt (65), two 38 Latch Spacers (82), and an M8 Nut (68). 68 67 Attach the upper end of the Storage Latch (84) with an M8 x 53mm Bolt (67) and an M8 Nut (68).  Lower the Frame (38) (see HOW TO LOWER THE TREADMILL FOR USE on page 20). 84 Decals 74 68 82 65 14. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see page 22). 13