ProForm 515 Zlt English Manual - Page 8

3. Locate the Upright Wire (63) bundled between the Base (74) and the Belly Pan (52). Route the 3 Upright Wire into the Base and out of the indi- cated hole. Press a Base Cap (70) into each side of the Base (74) (only one side is shown). See the inset drawing. Cut the plastic tie near the Upright Wire (63). Be careful not to damage the Upright Wire. 52 74 63 Hole Tie 70 Cut 63 4. Identify the Right Upright (76). Have a second person hold the Right Upright near the 4 Base (74). 63 See the inset drawing. Tie the wire tie in the Right Upright (76) securely around the end of the Upright Wire (63). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie through the Wire 63 76 Right Upright. Tie Wire Tie 76 74 8