ProForm 520 Trainer Treadmill English Manual - Page 6

ASSEMBLY To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, lubricant may be transferred to the top of the walking belt or to the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, wipe it off with a soft cloth and mild, non-abrasive cleaner. Assembly requires the included hex keys and your own Phillips screwdriver mallet , adjustable wrench , and needlenose pliers , rubber . Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly. Console Bolt (22)-2 Silver Ground Screw (11)-2 3/4" Screw (2)-10 1 1/2" Screw (6)-4 Upright Bolt (27)-4 Wheel Nut (35)-2 Nut (47)-2 1/4" Star Washer (21)-2 Wheel Bolt (14)-2 Frame Bolt (32)-2 Handrail Bolt (20)-4 Frame Washer (33)-2 Handrail Star Washer (19)-4 Wheel Spacer (44)-4 Upright Star Washer (39)-4 6