ProForm 600 Zlt Treadmill Uk Manual - Page 10

7. With the help of a second person, hold a Bolt Spacer (90) inside the lower end of the Left Upright (85). Insert an M10 x 95mm Patch Bolt (8) with an M10 Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (90), an M10 x 68mm Patch Bolt (114), and an M10 Star Washer (9). Hold the Left Upright Spacer (86) and the Left Upright (85) against the Base (95). Tighten the M10 x 95mm Patch Bolt (8) and the M10 x 68mm Patch Bolt (114) until the heads of the Patch Bolts touch the Left Upright; do not fully tighten the Patch Bolts yet. With the help of a second person, tip the treadmill so that the Base (95) is flat on the floor. 7 90 114 9 86 95 8 85 8. Identify the Left and Right Upright Covers (109, 110) which are marked with "Left" and "Right" 8 stickers. Slide the Left Upright Cover onto the Left Upright (85) as shown. Slide the Right Upright Cover onto the Right Upright (89) as shown. 109 85 89 110 10