ProForm 600 Zlt Treadmill Uk Manual - Page 9

5. Hold a Bolt Spacer (90) inside the lower end of the Right Upright (89). Insert an M10 x 95mm 5 Patch Bolt (8) with an M10 Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (90), an M10 x 68mm Patch Bolt (114), and an M10 Star Washer (9). Hold the Right Upright (89) against the Right Upright Spacer (91). Be careful not to pinch the Upright Wire (88). Tighten the M10 x 95mm Patch Bolt (8) and the M10 x 68mm Patch Bolt (114) until the heads of the Patch Bolts touch the Right Upright; do not fully tighten the Patch Bolts yet. 89 8 114 9 88 91 90 6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (56) so that the treadmill is more stable; do not fully fold the Frame yet. Attach a Wheel (97) with the M10 Nut (19), and the M10 x 50mm Bolt (31) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely. Press a Base Cap (87) into the Base (95). 6 87 31 56 95 97 19 9