ProForm 696 Elliptical Uk Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included tools, assembly requires a Phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has been preassembled. M8 Split Washer (90)-3 M8 x 16mm Washer (110)-2 M8 Washer (88)-4 M8 x 23mm x 1mm Washer (112)-2 M4 x 16mm Round Head Screw (101)-14 M6 x 10mm Button Screw (104)-8 M8 Nylon Locknut (78)-3 22mm x 16mm Wave Washer (111)-2 23mm x 19mm Wave Washer (97)-2 Hub Screw (87)-8 M8 x 23mm Button Screw (84)-4 M8 x 38mm Button Screw (4)-6 M8 x 71mm Button Bolt (80)-1 M10 x 82mm Button Screw (82)-2 M10 x 127mm Button Screw (83)-2 M8 x 23mm Shoulder Screw (115)-2 M10 x 58mm Shoulder Bolt (71)-2 5