ProForm 760 Hr Bike Uk Manual - Page 12
Note: The con
View all ProForm 760 Hr Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
To reset the displays, press the On/Reset button. Note: The console can show speed and distance in either miles or kilometres. The letters MPH or KM/H will appear in the lower section of the large display to show which system of measurement is selected. To change the system of measurement, hold down the On/Reset button for about six seconds. Note: When the button is held down, the fan will turn on for a moment. When the batteries are replaced, it may be necessary to reselect the desired system of measurement. 5 Measure your heart rate if desired. If there are thin sheets of plastic on the metal contacts Metal Contacts on the hand- grips, peel off the plastic. To use the hand- grip pulse sen- sor, hold the handgrips with your palms resting against the metal contacts. Avoid moving your hands. When your pulse is detected, the heart- shaped indicator in the large display will flash each time your heart beats. After a moment, two dashes (- -) will appear and then your heart rate will be shown. For the most accurate heart rate reading, continue to hold the handgrips for about 30 seconds. Note: When you first hold the handgrips, the large dis- play will show your heart rate continuously for 30 seconds. The display will then show your heart rate along with other feedback modes. 6 Turn on the fan if desired. To turn on the fan at low speed, press the fan button. To turn on the fan at high speed, press the fan button a second Fan Button Thumb Wheel time. To turn off the fan, press the fan button a third time. Note: If the fan is turned on and the pedals are not moved for about half a minute, the fan will turn off to conserve the batteries. Rotate the thumb wheel on the right side of the console to pivot the fan to the desired angle. 7 When you are finished exercising, the console will automatically turn off. If the pedals are not moved for a few seconds, the displays will pause and the time will flash in the large display. If the pedals are not moved and the console buttons are not pressed for a few minutes, the console will turn off to conserve the batteries. 12