ProForm 780 Zlt Treadmill Uk Manual - Page 7

1. Make sure that the power cord is unplugged. 1 Remove the 3/8" Locknut (11), the 3/8" x 2" Bolt (3), and the shipping bracket (C) from the Base (60). Remove the shipping bracket from the other side of the treadmill. Discard the shipping brackets. Save the Locknuts and the Bolts for steps 3 and 6. C 60 3 11 2. With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (53) so that the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Cut the tie securing the Wire Harness (86) to the Base (60). Locate a tie in the indicated hole in the Base, and use the tie to pull the Wire Harness out of the hole. Attach two Base Feet (88) to the Base (60) in the locations shown with two Base Foot Spacers (89) and two #8 x 1" Tek Screws (2). Then, attach two Base Feet (88) with only #8 x 1" Tek Screws (2). 2 B 86 89 53 88 2 Hole 3. Attach a Wheel (90) with the 3/8" x 2" Bolt (3) and the 3/8" Locknut (11) that you removed in 3 step 1. Do not overtighten the Locknut; the Wheel must turn freely. Press a Base Cap (85) into the Base (60). 89 88 2 60 3 A 60 88 2 88 2 85 90 11 7