ProForm 780 Zlt Treadmill Uk Manual - Page 9

6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (53) so the treadmill is more stable; do 6 A B not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). 85 Attach a Wheel (90) with the 3/8" x 2" Bolt (3) and the 3/8" Locknut (11) that you removed in step 1. Do not overtighten the Nut; the Wheel 60 must turn freely. Press a Base Cap (85) into the Base (60). 53 3 90 11 7. Hold a Bolt Spacer (84) inside the lower end of the Left Upright (77). Insert a 3/8" x 4" Bolt (5) 7 with a 3/8" Star Washer (12) into the Left 5 77 Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (84), 3/8" x 4" Bolt (5), and 3/8" Star Washer (12). 12 82 Hold the Left Upright Spacer (82) and the Left 84 Upright (77) against the Base (60). Tighten the 3/8" x 4" Bolts (5) until the heads of the Bolts touch the Left Upright; do not fully tighten the Bolts yet. 84 60 With the help of a second person, tip the treadmill so that the Base (60) is flat on the floor. 8. Identify the Right Handrail (105). Remove the tie 8 from the bracket on the Right Handrail. Have a second person hold the Right Handrail near the Right Upright (79). Insert the Wire Harness (86) into the bottom of the Right Handrail (105) and out of the hole on top of the Right Handrail. Insert the bracket on the Right Handrail (105) into the top of the Right Upright (79). Attach the Right Handrail (105) to the Right Upright (79) with three 5/16" Star Washers (9) and three 5/16" x 3/4" Bolts (4); do not fully tighten the Bolts yet. Be careful not to pinch the Wire Harness (86). Hole Tie 4 9 4 79 86 105 9