ProForm 780 Zlt Treadmill Uk Manual - Page 8

4. Identify the Right Upright (79) and the Right Upright Spacer (83). Insert the Wire Harness (86) through the Right Upright Spacer as shown. Set the Right Upright Spacer on the Base (60). With the help of a second person, hold the Right Upright (79) near the Base (60). See the inset drawing. Tie the wire tie in the Right Upright securely around the end of the Wire Harness (86). Then, pull the other end of the wire tie until the Wire Harness is routed completely through the Right Upright. 4 86 86 Wire Tie 79 Wire Tie 5. Hold a Bolt Spacer (84) inside the lower end of the Right Upright (79). Insert a 3/8" x 4" Bolt (5) 5 with a 3/8" Star Washer (12) into the Right Upright and the Bolt Spacer. Repeat this step 79 with a second Bolt Spacer (84), 3/8" x 4" Bolt (5), and 3/8" Star Washer (12). Hold the Right Upright (79) against the Right Upright Spacer (83). Be careful not to pinch the Wire Harness (86). Tighten the 3/8" x 4" Bolts (5) until the heads of the Bolts touch the Right Upright; do not fully tighten the Bolts yet. 79 86 83 60 5 12 86 84 83 8