ProForm 8.0 Ex Bike English Manual - Page 27
Switch. Next, loosen the M5 x 16mm Flat Head Screw
View all ProForm 8.0 Ex Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. Before you adjust the reed switch, unplug the power adapter. Using a small standard screwdriver, carefully pry the left Cover Insert (35) off the left Crank Arm Cover (33). Next, remove the M5 x 12mm Screw (85) and the M5 x 21mm Screw (86). Then, rotate the left Crank Arm Cover out of the way. Locate the Reed Switch (57). Rotate the Left Crank Arm (20) until a Magnet (55) is aligned with the Reed Switch. Next, loosen the M5 x 16mm Flat Head Screw (60), slide the Reed Switch slightly toward or away from the Magnet, and then retighten the Screw. 55 57 33 86 85 35 20 60 Plug in the power adapter and rotate the Left Crank Arm (20) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the parts that you removed. 27