ProForm 940s English Manual - Page 6

ASSEMBLY Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench adjustable wrenches . , a phillips screwdriver and two 1. Carefully slide the Handlebar Post (14) onto the Frame (15). Be careful to avoid pinching the 1 wires inside the Handlebar Post. Attach the Handlebar Post with three M10 x 25mm Button Screws (8) and three M10 Split Washers (41). 14 41 8 15 8 41 8 2. Identify the Front Stabilizer (17), which has Wheels (25) on the ends. Hold the Front Stabilizer (17) against the saddle on the front of the Frame (15). Attach the Front Stabilizer with two M8 x 90mm Carriage Bolts (30) and two M8 Nylon Locknuts (21). Attach the Rear Stabilizer (not shown) in the same manner. 3. Insert the Pulse Grip Wires (60) through the holes in the Handlebar Post (14) as shown. Attach the Handlebar (5) to the Handlebar Post with two M10 x 25mm Button Screws (8) and two M10 Split Washers (41). Be careful to avoid pinching the wires inside the Handlebar and Handlebar Post. 2 30 25 3 41 8 41 25 17 15 21 60 5 14 6