ProForm 980 Audio Trainer Treadmill English Manual - Page 9
Patch Bolt 6, and two 3/8 Star Washers 12
View all ProForm 980 Audio Trainer Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
6. Attach the Left Upright (81) to the Base (90) with a 3/8" x 3 1/2" Patch Bolt (8), a 3/8" x 1 1/2" 6 81 Patch Bolt (6), and two 3/8" Star Washers (12) 90 in the indicated locations. Partially tighten the Patch Bolts until the heads of the Patch Bolts touch the Base; do not fully tighten the Patch Bolts yet. 8 With the help of a second person, tip the treadmill so that the Base (90) is flat on the floor. 12 6 7. Orient the Crossbar (82) so that the indicated bump is in the position shown. Attach the 7 Crossbar to the Uprights (81, 83) with four 1/4" x 5/8" Bolts (3); do not tighten the Bolts yet. Note: The bump will go into a hole in the Right Upright. 3 82 3 Bump 81 83 8. Identify the Right Handrail (78), which is marked 8 with a sticker. Insert the end of the Wire Harness (84) into the hole in the bottom of the Right Handrail and out of the hole in the top. 84 78 9