ProForm Crosstrainer 970 English Manual - Page 4

ASSEMBLY Assembly requires two persons. Place all parts of the crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench and a rubber mallet . As you assemble the crosstrainer, use the drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part, from the PART LIST on page 22. The second number refers to the quantity used in assembly. Note: Some small parts may have been preassembled for shipping. If a part is not in the parts bag, check to see if it has been pre-assembled. M6 Flat M10 Zinc Split Washer (71)-3 Washer (85)-2 M10 Black Split Washer (77)-3 M10 Nylon Black Locknut (63)-2 M10 Zinc Nylon Locknut (66)-2 M4 x 16mm Screw (73)-1 M6 x 16mm Screw (87)-5 M6 x 50mm Screw (69)-3 M6 x 25.4mm Button Screw (79)-1 M10 x 27mm Button Screw (76)-3 1/2" Nylon Locknut (52)-1 M10 x 45mm Button Screw (74)-2 M10 x 52mm Button Bolt (68)-2 M10 x 112mm Carriage Bolt (65)-2 1/2" x 58mm Bolt (51)-1 4