ProForm Crosswalk 380 Treadmill English Manual - Page 10
Be Damaged When The Power Is
View all ProForm Crosswalk 380 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8. Start an M5 x 16mm Screw (85) with an M5 Star 8 Washer (7) into the Right Handrail (33), and then start two M4.2 x 19mm Screws (10) into the Right Handrail. Tighten the M5 x 16mm Screw and then tighten the two M4.2 x 19mm 33 Screws; do not overtighten the Screws. Set the Left Handrail (not shown) on the Console Assembly (91). Attach the Left Handrail to the Console Assembly in the same way. Note: There are no wires on the left side. 91 85 7 10 9. Remove the ties from the Cage Nuts (105) in the Right Handrail (33) and the Left Handrail (not shown). If necessary, press the Cage Nuts back into place. With the help of a second person, hold the Console Assembly (91) near the Right Upright (54). Connect the Wire Harness (39) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Insert the connectors and the excess wire downward into the Right Upright (54). Remove the wire tie from the Wire Harness. 9 33 105 39 54 91 Console Console Wire Wire Wire Tie 39 10