ProForm Crosswalk 380 Treadmill English Manual - Page 6

ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner. Assembly requires the included hex keys and your own Phillips screwdriver wrench , scissors , needlenose pliers , and rubber mallet , adjustable . Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware may be included. If a part is missing, call 1-888-533-1333. M4.2 x 19mm Tek Screw (26)-4 M5 x 16mm Screw (85)-2 M4.2 x 19mm Screw (10)-4 M4 x 10mm Ground Screw (84)-1 M8 x 15mm Bolt (8)-4 #10 x 1" Tek Screw (112)-2 M5 Star Washer (7)-2 M10 Flat Washer (14)-2 M8 Star Washer (5)-4 1/4" Flat Washer (32)-4 M10 x 58mm Bolt (2)-4 M10 x 60mm Bolt (35)-2 M10 x 60mm Patch Bolt (1)-2 M10 Star Washer (9)-6 M10 Nut (16)-2 1/4" x 3" Bolt (111)-4 6