ProForm I Series 785 F Elliptical User Manual - Page 10

10. Attach the Right Pedal Arm (58) to the Right Pedal Bracket (64) with two M10 x 45mm Patch 10 Screws (99). Repeat this step for the Left Pedal Arm (44). 44 64 58 99 11. Identify the Right Handlebar (9), which is marked with a "Right" sticker. See the inset drawing. Locate the wire tie in the Upright (4). Tie the lower end of the wire tie to the Pulse Wire (63) in the Right Handlebar (9). Next, pull the upper end of the wire tie upward out of the top of the Upright. Then, untie and discard the wire tie. Slide the Right Handlebar (9) onto the right side of the Upright (4). Make sure that the hexagonal holes are in the indicated location. Tip: Avoid pinching the wires. Attach the Right Handlebar (9) with two M8 x 38mm Bolts (96) and two M8 Locknuts (102). Make sure that the Locknuts are in the hexagonal holes. Repeat this step for the Left Handlebar (8). 11 Avoid pinching the wires 110 Wire Tie 63 8 102 63 4 9 Hexagonal Holes 96 Wire Tie 63 10