ProForm J6si Treadmill English Manual - Page 8
Attach the Console Base 87 to the Left and Right - used
 |
View all ProForm J6si Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
7. Attach the Console Base (87) to the Left and Right Handrails (74, 85) with four Long Screws (114). 7 87 74 Refer to assembly step 6. Tighten the four Handrail 85 Bolts (78) used in assembly step 6. 114 114 8. Press two Small Upright Plugs (79) into the holes near the upper ends of the Uprights (82). 8 79 82 9. Remove the backing from the Adhesive Clip (99). Press the Adhesive Clip onto the base of the right Upright (82) 9 as shown. Press the Allen Wrench (100) into the Adhesive Clip. 82 100 99 10. Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
 |
 |
8
7.
Attach the Console Base (87) to the Left and Right
Handrails (74, 85) with four Long Screws (114).
Refer to assembly step 6. Tighten the four Handrail
Bolts (78) used in assembly step 6.
85
74
114
114
7
87
10.
Make sure that all parts are tightened before you use the treadmill.
To protect the floor or carpet, place a
mat under the treadmill.
82
79
8.
Press two Small Upright Plugs (79) into the holes near
the upper ends of the Uprights (82).
8
100
99
82
9.
Remove the backing from the Adhesive Clip (99). Press
the Adhesive Clip onto the base of the right Upright (82)
as shown. Press the Allen Wrench (100) into the
Adhesive Clip.
9