ProForm Performance 1800i Treadmill English Manual - Page 10
Then, remove and save the four indicated
View all ProForm Performance 1800i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
4. Hold the Right Upright (84) against the Base (93). Make sure not to pinch the Upright Wire 4 (83). 23 Attach the Right Upright (84) with two 3/8" x 2 3/4" Screws (23), two 3/8" x 1 1/4" Screws (20), and four 3/8" Star Washers (25) as shown; do not fully tighten the Screws yet. 25 Attach the Left Upright (not shown) in the same way. Note: There are no wires on the left 23 side. 5. Identify the Left and Right Upright Covers (89, 90). Slide the Left Upright Cover (89) onto the Left Upright (91), and slide the Right Upright Cover (90) onto the Right Upright (84). Press the Upright Covers downward; do not snap the Upright Covers into place yet. Then, remove and save the four indicated 5/16" x 2" Screws (2). If there is a film (E) covering the decal on each Upright (84, 91), carefully remove the film. 25 83 93 25 20 84 25 20 5 E 2 91 2 89 84 E 90 10