ProForm Performance 1800i Treadmill English Manual - Page 31
If the walking belt slips when walked on, UNPLUG THE POWER, CORD., SYMPTOM: The tablet holder does
![]() |
View all ProForm Performance 1800i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each edge of the walking belt 2 to 3 in. (5 to 7 cm) off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened. SYMPTOM: The tablet holder does not stay in place a. Rotate the tablet holder backwards. Then, tighten the indicated screw slightly until the tablet holder stays in place when it is rotated to the desired position. a b Tablet Screw Holder 31
![](/manual_guide/products/proform-performance-1800i-treadmill-english-manual-69427a9/31.png)