ProForm Performance 1800i Treadmill English Manual - Page 13
If You Do Not Connect
View all ProForm Performance 1800i Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
10. IMPORTANT: To avoid damaging the Pulse Crossbar (80), do not use power tools, and 10 2 6 do not overtighten the #10 x 3/4" Screws (6) or the 5/16" x 2" Screws (2). 8 Orient the Pulse Crossbar (80) as shown. Attach the Pulse Crossbar with two of the 5/16" x 2" Screws (2) that you removed in step 5, two 5/16" 2 Star Washers (8), and two #10 x 3/4" Screws (6); start all four Screws, and then tighten them. Then, tighten the other two 5/16" x 2" Screws (2). 80 2 6 8 2 11. With the help of a second person, hold the console assembly (G) near the Handrails (74) (only 11 one side is shown). See the inset drawing. Connect the Upright Wire (83) to the console wire (I). The connec- tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN G ON THE POWER. Then, remove any wire ties from the Upright Wire. I 83 74 I 83 13