ProForm Performance 1800i Treadmill English Manual - Page 17

18. Press the two tabs (not shown) on the Tablet Holder (100) into the slots (M) in the console assembly (G). Then, attach the Tablet Holder (100) with four #8 x 5/8" Screws (99). Tip: Start the two upper Screws first, and then start the two lower Screws. Do not overtighten the Screws. IMPORTANT: The Tablet Holder (100) is designed for use with most full-size tablets. Do not place any other electronic device or object in the Tablet Holder. 18 Start First 99 100 G M 19. IMPORTANT: You must activate your Console (96) to begin using its exclusive features. 19 First, plug in the power cord (see page 19) and 96 turn on the power (see page 21). Then, using your smart phone or tablet, go to iFit.com/activate and follow the instructions to activate the Console (96). Note: If you do not have a smart phone or tablet, use your computer to go to iFit.com/activate for an alternate way to activate the Console (96). If you do not have a computer, call Customer Care (see the front cover of this manual). 20. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 30 and 31). Note: Extra parts may be included. 17