ProForm Performance 400 S Treadmill English Manual - Page 15
If You Do Not Connect The Con
View all ProForm Performance 400 S Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
12. With the help of a second person, hold the console assembly near the Right Handrail (83). Connect the Upright Wire (87) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 12 Console Assembly Console Wire 87 Console Wire 87 Wire Tie 83 13. Set the console assembly on the Left Handrail (82) and the Right Handrail (83). Be careful not 13 to pinch any wires. Insert the excess Upright Wire (87) into the Right Upright (85). Attach the console assembly with six #8 x 3/4" Screws (1) and four 1/4" x 1/2" Screws (9) with four 1/4" Star Washers (12). Start all ten 87 Screws and then tighten them. 83 See steps 5 and 7. Fully tighten the four 3/8" x 4 12 1/2" Screws (7) and the two 3/8" x 1 1/2" Screws (14). 9 1 1 See step 9. Fully tighten the six 5/16" x 1" Screws (4). 85 Console Assembly 12 82 9 1 15