ProForm Pfevex92407 Instruction Manual - Page 8

7. While another person holds the Console (6) near the Upright (3), connect the console wire harness to the Upper Wire Harness (32). Next, connect the console game wire marked with a tag to the Game Wire (45) marked with a tag. Then, connect the other console game wire to the other Game Wire. Tip: Avoid pinching the wires during this step. Insert the excess wires downward into the Upright (3). Attach the Console (6) to the Upright with four M4 x 15mm Bright Screws (15). 7 Console Wire Harness 32 3 15 6 45 Console Game Wires 15 Avoid pinching the wires during this step 8. Attach the Water Bottle Holder (29) to the Upright (3) with two M4 x 15mm Screws (68). 8 68 29 3 9. Orient the Seat Post (5) as shown. Loosen the 9 Adjustment Knob (11) a few turns, pull the Adjustment Knob outward, and insert the Seat Post into the Frame (1). Move the Seat Post upward or downward to the desired position, and then release the Adjustment Knob into one of the adjustment holes in the Seat Post. Then, tighten the Adjustment Knob a few turns. Make sure that the Adjustment Knob is engaged in an adjustment hole. Attach an M6 x 8mm Screw (51) to the front of the Seat Post (5). 51 5 1 11 8