ProForm Power 1080 Treadmill English Manual - Page 14
Press the Left Base Cover 82 and the Right
View all ProForm Power 1080 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
12. Set the console assembly on the Left Handrail (88) and the Right Handrail (87). Be careful not 12 to pinch any wires. Insert the excess Upright Wire (not shown) into the Left Handrail. Attach the console assembly with six #8 x 1/2" Screws (1) and four 1/4" x 1/2" Screws (36) with four 5/16" Flat Washers (27) and four 1/4" Star Washers (35) as shown. Start all ten Screws, 35 and then tighten them. 27 See step 8. Fully tighten the four 5/16" x 1" Screws (5) and the two 5/16" x 1 1/4" Bolts (4). 36 87 1 1 Console Assembly 88 35 27 36 1 1 13. Firmly tighten the four 3/8" x 2 3/4" Screws (7) and the four 3/8" x 1 1/4" Screws (8) (only one 13 side is shown). Press the Left Base Cover (82) and the Right Base Cover (83) onto the Base (94) until they snap into place. 14. Identify the Left and Right Handrail Covers (85, 86). Slide the Left Handrail Cover (85) onto the Left Handrail (88). Slide the Right Handrail Cover (86) onto the Right Handrail (87). Attach each Handrail Cover with a #8 x 1/2" Screw (1). 7 8 94 82 14 85 88 1 83 86 87 1 14