ProForm Power 1080 Treadmill English Manual - Page 9

ASSEMBLY •• To hire a service technician to assemble this product in your home, call 1-800-445-2480. •• Assembly requires two persons. •• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. •• After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. •• Left parts are marked “"L”" or “"Left”" and right parts are marked “"R”" or “"Right.”" •• To identify small parts, see page 8. •• Assembly requires the following tools: the included hex keys one adjustable wrench one Phillips screwdriver a pair of scissors To avoid damaging parts, do not use power tools. 1. Go to www.proformservice.com/registration on your computer and register your product. 1 •• activates your warranty •• saves you time if you ever need to contact Customer Care •• allows us to notify you of upgrades and offers Note: If you do not have Internet access, call CUSTOMER CARE (see the front cover of this manual) and register your product. 2. Make sure that the power cord is unplugged. Place a piece of cardboard below the rear of the 2 Frame (56) to protect the floor or carpet. Attach the Left Wheel Cap (96) to the Base (94) with two #8 x 3/4" Screws (2). Attach the Right Wheel Cap (not shown) to the right side of the Base (94) in the same way. 94 2 9 56 96 Cardboard