ProForm Power 1295i Instruction Manual - Page 16

18. P ress the two tabs on the Tablet Holder (110) into the slots (L) in the console assembly (F). Attach the Tablet Holder (110) with four #8 x 5/8" Machine Screws (115). Note: Start the two top Machine Screws first, and then start the two bottom Machine Screws. Be careful not to overtighten the Machine Screws. IMPORTANT: The Tablet Holder (110) is designed for use with most full-size tablets. Do not place any other electronic device or object in the Tablet Holder. 18 Start First 115 110 LF 19. Carefully slide the Upright Crossbar (88) between the Left and Right Uprights (89, 90). 19 Attach the Upright Crossbar with the four 5/16" x 3/4" Screws (25) that you removed in step 5 and four 5/16" Star Washers (11); start all four Screws, and then tighten them. 11 25 88 25 11 90 89 20. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 33 and 34). Note: Extra parts may be included. 16