ProForm Power 995 C Treadmill English Manual - Page 14
Press the Left Base Cover 81 and the Right
View all ProForm Power 995 C Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
15. F irmly tighten the four 3/8" x 2 3/4" Screws (5) and then the four 3/8" x 1 1/4" Screws (6) (only 15 one side is shown). 89 Press the Left Base Cover (81) and the Right Base Cover (89) onto the Base (95) until they snap into place. 5 6 95 81 16. R aise the Frame (63) to the position shown. Have a second person hold the Frame until 16 this step is completed. Orient the Storage Latch (57) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (57) to the Base (95) with a 3/8" x 2" Bolt (3) and a 3/8" Nut (12). Attach the upper end of the Storage Latch (57) to the bracket on the Frame (63) with a 3/8" x 1 3/4" Bolt (4) and a 3/8" Nut (12). Lower the Frame (63) (see HOW TO LOWER THE TREADMILL FOR USE on page 25). 63 12 4 Latch 57 Knob Large Barrel 95 12 3 17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra parts may be included. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 27 and 28). 14