ProForm Power 995 C Treadmill English Manual - Page 7

ASSEMBLY • To watch an assembly video, go to http://productvideo.co/ assembly/proform or use your mobile phone or smartphone to read the QR code at the right. • To hire a service technician to assemble this product in your home, call 1-800-445-2480. • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • Assembly requires the following tools: the included hex keys an adjustable wrench one Phillips screwdriver scissors To avoid damaging parts, do not use power tools. 1. Make sure that the power cord is unplugged. 1 Attach the Left Wheel Cap (94) to the Base (95) with two #8 x 3/4" Screws (2).  Attach the Right Wheel Cap (not shown) to the Base (95) in the same way. 95 2 94 7