ProForm Power 995 C Treadmill English Manual - Page 8
See the inset drawing.
 |
View all ProForm Power 995 C Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Pull the Upright Wire (78) and the base ground wire (A) through the indicated hole in the 2 Base (95). If there is a screw (B) pre-installed in the side of the Base (95), remove and discard it. Attach the ground wire (A) to the Base with a #8 x 1/2" Ground Screw (9). Press the Grommet (90) into the square hole in the Base (95). Hole 78 9 90 B A 95 3. Identify the Left Upright (79). Have a second person hold the Left Upright near the Base (95). See the inset drawing. Tie the wire tie in the Left Upright (79) securely around the end of the Upright Wire (78). Then, pull the other end of the wire tie until the Upright Wire is routed through the Left Upright. 3 79 78 79 Wire Tie Wire Tie 78 78 95 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
8
3.
Identify the Left Upright (79). Have a second
person hold the Left Upright near the Base (95).
See the inset drawing.
Tie the wire tie in the
Left Upright (79) securely around the end of the
Upright Wire (78). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Left Upright.
78
3
78
79
Wire
Tie
Wire
Tie
79
95
78
2.
Pull the Upright Wire (78) and the base ground
wire (A) through the indicated hole in the
Base (95).
If there is a screw (B) pre-installed in the side
of the Base (95), remove and discard it. Attach
the ground wire (A) to the Base with a #8 x 1/2"
Ground Screw (9).
Press the Grommet (90) into the square hole in
the Base (95).
78
2
95
90
Hole
9
A
B