ProForm R400 Rower Uk Manual - Page 6

5. The Console (71) requires two AA 1,5V batteries. Alkaline batteries are recommended. See the inset drawing. Insert two batteries into the clip on the back of the Console; make sure that the negative ends of the batteries (marked "-") are touching the springs in the clip. Next, plug the Reed Switch Wire (72) into the Console (71). Press the Console into the Top Cover (67). Make sure that the Reed Switch Wire is not pinched between the Console and the Top Cover. 6. Slide the Seat (28) onto the Rail (29). Attach two Stops (13) to the Rail with two M8 Nuts (14). Press the Rail Endcap (12) into the Rail (29). 5 67 72 71 6 29 13 Batteries Clip 71 12 13 28 14 7. Make sure that all parts are properly tightened before you use the rowing machine. Place a mat under the rowing machine to protect the floor or carpet. 6