ProForm Sport 5.0 Instruction Manual - Page 10

If You Do Not Connect The Con

Page 10 highlights

7. Hold the Handrails (59, 64) near the Uprights (66, 76). Route the Upright Wire (63) into the bottom of the Right Handrail (64) and out of the hole in the side of the Right Handrail. Set the Handrails (59, 64) on the Uprights (66, 76). Be careful not to pinch the Upright Wire (63). Partially tighten four 5/16" x 3 1/4" Screws (78) with four 5/16" Star Washers (6) through the Handrails and into the Uprights; start all four Screws, and then tighten them. Then, tighten the four 1/4" x 1 1/4" Screws (77). 7 78 6 77 59 78 66 6 63 64 77 76 8. With the help of a second person, hold the console assembly (D) near the Right Handrail (64). See the inset drawing. Connect the Upright Wire (63) to the console wire. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Then, remove the wire tie from the Upright Wire. 8 Console Wire 64 D 63 Wire Tie Console Wire 63 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

10
7.
Hold the Handrails (59, 64) near the Uprights
(66, 76).
Route the Upright Wire (63) into the bottom of
the Right Handrail (64) and out of the hole in the
side of the Right Handrail.
Set the Handrails (59, 64) on the Uprights (66,
76).
Be careful not to pinch the Upright Wire
(63).
Partially tighten four 5/16" x 3 1/4" Screws
(78) with four 5/16" Star Washers (6) through
the Handrails and into the Uprights;
start all
four Screws, and then tighten them.
Then, tighten the four 1/4" x 1 1/4" Screws
(77).
7
8.
With the help of a second person, hold the con-
sole assembly (D) near the Right Handrail (64).
See the inset drawing.
Connect the Upright
Wire (63) to the console wire.
The connectors
should slide together easily and snap into
place.
If they do not, turn one connector and try
again.
IF YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Then, remove the wire tie from
the Upright Wire.
63
64
D
8
Wire
Tie
63
76
78
66
6
6
77
77
59
64
Console
Wire
63
Console
Wire
78