ProForm Sport 5.0 Instruction Manual - Page 14
Make sure that all parts are properly tightened before you use the treadmill., start all four Screws
View all ProForm Sport 5.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
15. Attach the Tablet Holder (84) to the console assembly (D) with four #8 x 3/8" Screws (83); 15 start all four Screws, and then tighten them. Do not overtighten the Screws. D 83 84 83 16. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure place; one of the hex keys is used to adjust the walking belt (see pages 24 and 25). Note: Extra hardware may be included. 14
14
16.
Make sure that all parts are properly tightened before you use the treadmill.
If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 24 and 25). Note: Extra hardware
may be included.
15.
Attach the Tablet Holder (84) to the console
assembly (D) with four #8 x 3/8" Screws (83);
start all four Screws, and then tighten them.
Do not overtighten the Screws.
15
84
83
83
D