ProForm Sport 5.0 Instruction Manual - Page 7

ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • Assembly requires the following tools: the included hex key one Phillips screwdriver To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have Internet access, call Customer Service (see the front cover of this manual) and register your product. 2. Make sure that the power cord is unplugged. 2 Remove the two screws (A) and the shipping bracket (B) from the right side of the Base (74). Discard the screws and the shipping bracket. Repeat this step on the left side of the Base. Next, remove the tie securing the Upright Wire (63). Then, press a Base Cap (70) into each side of the Base (74) (only one side is shown). B 74 A Tie 63 70 7