ProForm Trailrunner 4.0 Treadmill English Manual - Page 30
UNPLUG THE POWER CORD. If the walking belt
View all ProForm Trailrunner 4.0 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, remove the key and UNPLUG THE POWER CORD. If the walking belt a has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idler roller bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is cen- tered. b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using b the hex key, turn both idler roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each edge of the walking belt 3 to 4 in. (8 to 10 cm) off the walking platform. Be careful to keep the walking belt cen- tered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened. PROBLEM: The treadmill will not connect to the wireless network SOLUTION: a. Perform a network test (see step 9 on page 25). b. Make sure the wireless settings on your console are correct (see step 2 on page 22). c. Make sure the settings for your wireless network are correct. d. If you still have questions, see the front cover of this manual. PROBLEM: The buttons on the screen do not work correctly SOLUTION: a. If the screen is not properly calibrated, it will be difficult to touch the correct buttons on the screen. To calibrate the screen, see step 7 on page 25. 30