ProForm Trainer 8.0 Instruction Manual - Page 13
the #8 x 3/4 Truss Head Screws 23.
 |
View all ProForm Trainer 8.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13. Carefully slide the Upright Crossbar (58) between the Left and Right Uprights (89, 90). 13 Attach the Upright Crossbar with the four 5/16" x 3/4" Screws (31) that you removed in step 5, and four 5/16" Star Washers (11); start all four Screws, and then tighten them. 90 58 31 11 89 31 11 14. Identify the #8 x 3/4" Screws (2). IMPORTANT: Do not confuse the #8 x 3/4" Screws with 14 the #8 x 3/4" Truss Head Screws (23). The #8 x 3/4" Truss Head Screws have flatter heads. Attach the Tray (74) to the Upright Crossbar (58) with four #8 x 3/4" Screws (2); start all four Screws, and then tighten them. 4 Then, tighten the four 1/4" x 1/2" Screws (4). 74 4 2 58 2 13
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
13
13.
Carefully slide the Upright Crossbar (58)
between the Left and Right Uprights (89, 90).
Attach the Upright Crossbar with the four 5/16"
x 3/4" Screws (31) that you removed in step 5,
and four 5/16" Star Washers (11);
start all four
Screws, and then tighten them.
13
89
58
11
11
31
31
90
14.
Identify the #8 x 3/4" Screws (2).
IMPORTANT:
Do not confuse the #8 x 3/4" Screws with
the #8 x 3/4" Truss Head Screws (23). The
#8 x 3/4" Truss Head Screws have flatter
heads.
Attach the Tray (74) to the Upright Crossbar
(58) with four #8 x 3/4" Screws (2);
start all four
Screws, and then tighten them.
Then, tighten the four 1/4" x 1/2" Screws (4).
14
2
58
2
74
4
4