ProForm Xp 160 Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included hex keys, assembly requires a Phillips screwdriver , an adjustable wrench , and a rubber mallet . As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. Star Washer (100)-3 M4 x 13mm M6 Split Washer (93)-2 Washer (88)-8 M8 Split Washer (72)-2 M10 Spacer (76)-2 Wave Washer (98)-8 M10 x 20mm x M10 x 20mm x M10 x 20mm x 1mm Washer 1.5mm Washer 2mm Washer (81)-2 (84)-2 (92)-4 M10 x 25mm Washer (94)-4 M8 Nylon M10 Nylon Locknut (96)-4 Locknut (97)-2 M4 x 16mm Self-tapping Screw (79)-10 M4 x 16mm Screw (86)-4 M6 x 35mm Phillips Screw (87)-8 M8 x 42mm Bolt (71)-4 M8 x 16mm Button Screw (95)-3 M8 x 48mm Button Screw (78)-2 M10 x 20mm Button Screw (91)-4 M10 x 23mm Shoulder Screw (80)-8 M10 x 62mm Bolt (89)-4 M10 x 78mm Button Screw (90)-2 5