ProForm Ze5 Rear Drive Elliptical English Manual - Page 8
Identify the Right and Left Upper Body Legs 6
 |
View all ProForm Ze5 Rear Drive Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
5. Apply some of the included grease to the Upright Axle (48) and to two Small Wave Washers (118). Insert the Upright Axle (48) through the Upright (5) and center it. Slide a Small Wave Washer (118) onto each side of the Upright Axle. Identify the Right and Left Upper Body Legs (6, 7), which are marked with "Right" and "Left" stickers, and orient them as shown. Slide the Right and Left Upper Body Legs (6, 7) onto each side of the Upright Axle (48). 5 7 118 Grease 5 6 Grease 118 48 6. Tighten an M8 x 16mm Patch Screw (102) and an M8 x 23mm x 1.5mm Washer (126) into each 6 end of the Upright Axle (48) at the same time. 102 126 48 126 102 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
8
5
5.
Apply some of the included grease to the Upright
Axle (48) and to two Small Wave Washers (118).
Insert the Upright Axle (48) through the Upright
(5) and center it. Slide a Small Wave Washer
(118) onto each side of the Upright Axle.
Identify the Right and Left Upper Body Legs (6,
7), which are marked with “Right” and “Left” stick-
ers, and orient them as shown.
Slide the Right and Left Upper Body Legs (6, 7)
onto each side of the Upright Axle (48).
118
118
48
6
5
7
Grease
Grease
6
6.
Tighten an M8 x 16mm Patch Screw (102) and
an M8 x 23mm x 1.5mm Washer (126) into each
end of the Upright Axle (48) at the same time.
102
102
126
126
48