Pyle PLD10BT PLD10BT Manual 1 - Page 21

Disc/USB/Card Operation 1. Loading or unloading a disc, USB or card 1.1 Loading a disc, USB or card To play files in a disc, insert a disc with label surface up into disc slot. it will automatically play. * CAUTION OF USING DISC 1) Handle a disc by its edge, do not touch the surface of play side. 2) Before inserting disc, wipe the disc outwards from the disc center with a clean, soft, dry, lint-free cloth. Do not use solvents /thinner such as petrol/benzine, cleaner. 3) After taking a disc out of disc slot, put the disc inside disc case to keep it clean. 4) Do not stick paper or tape on the disc surface of play side. If there is glue (or analog) on the disc surface, must wipe it up before using. Label surface up To play files in a USB, firstly open USB port cover, then insert USB storage into USB port, and then it will play files in the USB automatically. To play files in a card, firstly press REL button to detach control panel, then hold the right part of the control panel and pull rightwards a little and to you to remove it, and then insert the card with label side upward and contact end frontward into card slot as the following fig., and then attach control panel onto chassis again, by now it will play files in the card automatically . Label side facing upward Press in till heard a "CLICK" -19-