Pyle PLE520P PLE520P Manual 1 - Page 14
precautions, troubleshooting - electronics
View all Pyle PLE520P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
precautions ple730r ple520p • Never drive with the volume raised so high you cannot hear what is occuring in traffic around you. • Be aware that repeated exposure to excessive volume levels can permanently damage your hearing! • Keep all electronics away from moisture, dust, extreme heat or extreme vibrations. • Pyle Audio products are capable of sound pressure levels in excess of 150 dB. Continuous exposure to sound pressure levels over 100 dB may cause permanent loss of hearing. Use common sense and PRACTICE SAFE SOUND. troubleshooting If you experience... Signal Processor does not turn on. Check that: • Remote Turn-On wire has 12V. • 12V wire has 12V. • Ground wire is properly connected. Level of sound is low. Check that: • Wiring is not loose or cables misconnected/disconnected. • RCA cables are not faulty. Background noise is too high. Check that: • Wiring is not loose or cables misconnected/disconnected. • RCA cables are not faulty. 12