Pyle PLE520P PLE520P Manual 1 - Page 7

owner's manual features aux input switch the switch selects the aux or line inputs. LED level display these rows of LEDs display the Preamp Output Levels. Left and right channels are displayed independently at peak levels. power indicator LED this LED is illuminated when the unit is properly powered, grounded and the remote power has been turned on. fader control • in a 2 Amplifier, 4 Speaker system, rotating the knob to the FRONT side increases the level of the front speakers; rotating to the REAR side increase level of the rear speakers. At mid position, both sets of speakers are at maximum level. • in a 2 Speaker system, the fader control should be rotated to the position which provides highest levels for both sets of speakers. volume control allows adjustment of sound level for particular program material or source. defeat switch when the "DEF" switch is in the position, the equalizer functions are bypassed. Depressing the "DEF" switch again will restore the equalizer's operation. equalizer controls this seven-band equalizer gives you control over the output levels at various frequencies. subwoofer frequency control lets you adjust the subwoofer frequency and crossover point from 40-400 Hz. subwoofer boost control lets you adjust the subwoofer boost level from a 0 to +18 dB increase. power connections connect to power source as follows: +12V: Connect a red wire of at least 12 gauge to the car battery or other power source. GROUND: Connect a black wire of at least 12 gauge to car chassis for ground connection REMOTE: Connect an orange wire to remote activating (12V DC) wire of car stereo or other head unit. subwoofer/rear/front RCA cables are used to connect the subwoofer channel outputs channel outputs to the subwoofer channel amplifier inputs, the rear channel outputs to the rear channel amplifier inputs, and the front channel outputs to the front channel amplifier inputs. line and auxiliary inputs RCA cables are used to connect your car stereo head unit, CD player, or other source to either the line or aux inputs. 5