Pyle PWD701 User Guide - Page 1

1R / 4-BUTTON SERIES VEHICLE SECURITY SYSTEM System Operation Button 1 Button 2 Button 3 Button 4 ARMING OPERATION To arm the system press transmitter button 1: • The siren will chirp once. • The parking lights will flash once.* • The doors will lock.* • The LED will turn solid for 10 seconds then start flashing slowly. After 10 seconds the system is armed. Standard Features: Two 4-Button Remote Transmitters Status indicator (LED) Valet / override switch Multi-tone siren Dual stage impact detector Remote panic Remote chirp mute Remote sensor bypass Active or passive arming Optional Features: Starter disable Flashing parking lights Keyless entry Remote trunk or hatch release Illuminated entry Anti-Carjacking Hood and trunk protection Remote auto start Power window roll up Back-up battery w/charging circuit Glass break sensor Note: Some features may require additional parts and labor, and may not be appropriate for certain vehicles. Consult your authorized dealer. After Arming, if the system detects a bad sensor or an open zone, the siren will chirp and the parking lights will flash 4 times to indicate a zone is open. The system will ignore that input, but keep all other areas protected. While Armed, the system will trigger if: • The doors are opened. • The shock sensor detects an impact to the vehicle. • The hood or trunk is opened*. When triggered, the siren will sound, the horn will honk*, and the parking lights will flash* for 30 seconds. If the same input triggers the system 3 times during a single arming cycle, the system will bypass that input, keeping the other zones protected, until the next time the system is armed. If the shock sensor detects a light impact to the vehicle, the siren will chirp and the parking lights will flash 5 times* to warn away the potential intruder. *Optional Feature 1