Pyle SLFTRD20 Instruction Manual - Page 13
Problem, Potential Causes, Corrections
![]() |
View all Pyle SLFTRD20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
CARE, MAINTENANCE & TROUBLESHOOTING GUIDE WARNING: To prevent electrical shock, please turn o and unplug the treadmill before cleaning or performing routine maintenance. WARNING: Always check the wear and tear components like spring knob and running belt to prevent injury. CLEANING After each exercise, ensure that the unit is wiped down and any sweat is removed from the unit. The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be careful not to get excessive moisture on the display panel as this might damage the unit and create an electrical hazard. Please keep the treadmill, especially the computer console, out of direct sunlight to prevent damage to the screen. STORAGE Store the treadmill in a clean and dry indoor environment. Never leave or use the unit outdoors. Ensure the master power switch is o and the power cord is un-plugged from wall outlet. TROUBLESHOOTING GUIDE Problem Potential Causes Corrections Treadmill won't start 1. Treadmill not plugged in 1. Plug the power cord into the 2. Safety Tether Key is not wall outlet correctly installed. 2. Reinstall the Safety Tether Key 3. House Circuit breakers 3. Reset the circuit breaker, or has "tripped" call an electrician to replace 4. Treadmill circuit breakers the circuit breaker. has "tripped" 4. Wait 5 minutes and then try to restart the treadmill. Belt slips Belt not tight enough Adjust belt tension 1. Not enough lubrication 1. Apply lubricant. Belt hesitates when applied onto the running 2. Adjust belt tension stepped on deck. 2. Belt is too tight Belt is not centered Running belt tension not even across the rear roller Center the belt www.SereneLifeHome.com 13
![](/manual_guide/products/pyle-slftrd20-instruction-manual-824ea7d/13.png)