Pyle SLFTRD20 Instruction Manual - Page 6
Step 2, IMPORTANT, Step 3
![]() |
View all Pyle SLFTRD20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
B. Use two M8x16 Hexagon Socket Oval Head Bolts (S2) to secure both Left/Right Handlebar Support Tubes (3, 4) onto the Base Frame (1). 54 60 67 Main Control Cable Socket 61 3 4 Step 2 Connect the cable that comes from the Computer Console (54) to the Main Control Cable (6) that comes from the Right Handl ebar Support Tube (4). Slide the Handlebar (61) onto the both Left/Right Handlebar Support Tubes (3, 4). Secure the Handlebar (61) onto the both Left/Right Handlebar Support Tubes (3, 4) with four M8x55 Hexagon Socket Oval Head Bolts (60) and four M8 Curve Washers (67). IMPORTANT: While sliding the Handlebar (61) onto the both Left/Right Handlebar Support Tubes (3, 4), make sure the cables are installed inside the Right Handlebar Support Tube (4) and pay attention not to pinch the cables. S6 54 S4 Step 3 A. Turn the Computer Console (54) up or down to align the Socket Head Screw hole. Lock the Computer Console (55) in place by tightening the Socket Head Screw (54). B. Install both Handlebar Plastic Covers (S6) onto the Handlebar (61). Place the Safety Key (S5) onto the Computer Console (54). 6 www.SereneLifeHome.com
![](/manual_guide/products/pyle-slftrd20-instruction-manual-824ea7d/6.png)