RCA ANT1650 Owner/User Manual: ANT1650 - Page 2

English ANT1650 Hardware Before attempting to use your antenna, please remove all parts from the box and read the instructions carefully The ANT1650 antenna package includes the following items:. 1 ANT1650 Flat Multi-Directional Antenna with Built-In 6' Coaxial Cable 1 Amplifier Insert with Built-In Coaxial Cable Removable Foot Stand Setting Up the ANT1650 Find the best location for the antenna Before you connect the antenna, determine the best spot in your home for optimum reception. Visit www.antennaweb.org to see where your local broadcasts are coming from. Then, try as much as possible to avoid obstructions between these transmitters and your antenna. Because of its amplification and multi-directional capabilities, the ANT1650 receives UHF, VHF, and local high-definition broadcasts, providing quality reception from most locations. Note: The ANT1650 may work well sitting on your TV or other components. However, because electronic components can sometimes interfere with the antenna's reception, you might notice an effect on the antenna's performance. Likewise, placing the antenna on a metal surface may interfere with reception. If the antenna isn't performing as well as expected, try moving it away from the component or placing it on another surface. Then, re-scan for channels on your TV or converter box. Positioning the Antenna After locating the optimal position for your antenna, choose from one of three options: • Lay the ANT1650 flat The ANT1650 has raised feet on its bottom to prevent scratching of furniture. Make sure you place the antenna on a flat, level surface. Note: This is the position that usually gives optimal performance. • Hang the ANT1650 The back of the ANT1650 antenna has two mounting holes that can be used for hanging. Place both holes over screws inserted in your wall. • Stand the ANT1650 upright The ANT1650 comes with a removable stand. Simply place the antenna in the stand to prop the antenna in an upright position. 2