RCA ANT1650 Owner/User Manual: ANT1650 - Page 3

English Connecting the ANT1650 You can use the ANT1650 with or without its amplifier, depending on which connection gives you the best signal. Try using the amplifier first. If you notice that you've lost channels that you normally receive, try connecting without the amplifier. Note: If you find that some channels require the amplifier while others do not, try unplugging the power supply for the amplifier for those channels not requiring amplification. You can connect the ANT1650 directly to your TV or use it with a converter box. Built-In 2 Coaxial Cable ANT1650 ANTENNA Amplifier Insert TV/STB 3 4 TV 5 To connect the ANT1650 with the amplifier directly to your TV: 1. Make sure your TV is turned off. 2. Connect the ANT1650's built-in cable to the input jack of the amplifier. 3. Connect the amplifier's built-in cable to the antenna input on your TV. 4. Plug the amplifier's power cord into an electrical outlet. Important: This power unit should be plugged in so that it stays vertical or lies flat. 5. Re-scan for channels on your TV. Built-In 2 Coaxial Cable ANT1650 TV 3 To connect the ANT1650 without the amplifier directly to your TV: 1. Make sure your TV is turned off. 2. Connect the ANT1650's built-in coaxial cable to the antenna input on your TV. 3. Re-scan for channels on your TV. 3