RCA ANT1650 Owner/User Manual: ANT1650 - Page 5

English Built-In Coaxial Cable 2 Converter Box 4 ANT1650 3a Audio/Video -or- Coaxial 3b Cables Cable TV To connect the ANT1650 without the amplifier to a converter box: 1. Make sure your TV is turned off. 2. Connect the ANT1650's built-in coaxial cable to the antenna input on your converter box. 3. Connect the converter box to your TV using either audio/video cables or a coaxial cable: a. Audio/Video cable connection: Connect the video (yellow) and stereo audio (red and white) cables to the video and audio outputs on your converter box. Connect the other ends to the video and audio inputs on your TV. Make sure you match the colors of the jacks on each-yellow plug to yellow jack, red plug to red jack, and white plug to white jack. b. Coaxial cable connection: Connect a coaxial cable to the antenna output on your converter box. Connect the other end of the coaxial cable to the antenna input on your TV. 4. Re-scan for channels on your converter box. Notes: See your converter box's owner's manual for more detailed connection instructions. For additional information about setting up your converter box, visit www.keepmytv.com 5