RCA ANT1650 Owner/User Manual: ANT1650 - Page 4

English Built-In 2 Coaxial Cable ANT1650 ANTENNA Amplifier Insert TV/STB Converter Box 3 5 6 4a Audio/Video -or- Coaxial 4b Cables Cable TV To connect the ANT1650 with the amplifier to a converter box: 1. Make sure your converter box is turned off. 2. Connect the ANT1650's built-in cable to the input jack of the amplifier. 3. Connect the amplifier's cable to the antenna input on the converter box. 4. Connect the converter box to your TV using either audio/video cables or a coaxial cable: a. Audio/Video cable connection: Connect the video (yellow) and stereo audio (red and white) cables to the video and audio outputs on your converter box. Connect the other ends to the video and audio inputs on your TV. Make sure you match the colors of the jacks on each-yellow plug to yellow jack, red plug to red jack, and white plug to white jack. b. Coaxial cable connection: Connect a coaxial cable to the antenna output on your converter box. Connect the other end of the coaxial cable to the antenna input on your TV. 5. Plug the amplifier's power cord into an electrical outlet. Important: This power unit should be plugged in so that it stays vertical or lies flat. 6. Re-scan for channels on your converter box. 4