RCA D770 Owner/User Manual: D770 - Page 8

Changing The RF Remote Control Code (Continued) 1. Select Options in the Main menu. 2. Select System Options. 3. Select RF Remote. 4. If you normally use the SAT key on your remote to control your RCA satellite receiver, choose a number between 000 and 255. Follow the on-screen instructions to enter this number as your RF remote control code. However, if you use the AUX1 or AUX2 key, choose a number between 000 and 099. Then, to change the code on your remote to match the satellite receiver, perform the following: 1. Press and hold the SAT key, AUX1, or AUX2 key (depending on which key you use to control your satellite receiver). 2. Then use the Digit keys to enter the same RF remote control code (000-255 for SAT), or (000-099 for AUX1 or AUX2) on your remote control. Menu Function The Menu function is used to make changes in the selected settings, such as setting color, channels, timer, etc. The MENU key displays TV, DVD player, and DBS menu screens on your TV. Each Menu function will vary from brand to brand. ENTERING THE MENU MODE 1. Push the component key on the remote for the desired menu screen. 2. Push the MENU key. This allows you to view the menu of the chosen component. The menu should now be visible on your television. Note: With some brands you may have to press the GUIDE or INFO key for the on-screen menu. 3. While in MENU Mode, these keys will function as follows: Navigation LEFT/RIGHT keys will operate as cursor right and left. Navigation UP/DOWN keys will operate as cursor up and down. MENU or OK key applies the highlighted menu item. Not all functions in all models and brands of equipment may be fully supported. EXITING THE MENU MODE To exit the MENU Mode and clear the screen on your TV, push the CLEAR key. (BLINK) OR 9