RCA MAF15BKR Owner/User Manual - Page 1

flat panel solutions LCD TV Wall Mount Installation Manual MAF15BKR Fits TVs 15"- 32" Maximum Load Capacity - 55 lb (25 kg) English Thank you for choosing the RCA MAF15BKR Universal Flat Panel TV Wall Mount. This mount can be used for all major brands of 15" - 32" flat panel TVs, 55 lbs (25 kg) or under. Before attempting to mount your television set, please remove all parts from this package and read the installation instructions carefully. WARNING: Use of this mount with a TV weighing over 55 lbs. or with a screen larger than 32" could cause the mount to fail causing property damage and/or personal injury. CAUTION: This wall mount is intended for use only with the maximum weight of 25 kg/55 bls. Use with heavier than the maximum weights indicated may result in instability causing possible injury. Follow the installation and operation instructions carefully. Safety precautions Follow these precautions to ensure safe installation and mounting of your flat panel TV. 1. Read these instructions carefully before you begin. If you are unsure of any part of the process, contact a professional contractor or installer for assistance. Improper installation can result in injury or damage. 2. The wall or mounting surface must be capable of supporting the combined weight of the mount and the display; if not, the structure must be reinforced. 3. Safety gear and proper tools must be used. Failure to do so can result in injury and/or damage. A minimum of two people are required for installation. Do not attempt to install this mount alone under any circumstances. 4. Follow all instructions and recommendations regarding adequate ventilation and suitable locations for mounting your display. Consult the owner's manual for your particular display for more information. 5. For drywall installation, it is essential for the wall mount plate to be attached to wall studs. (Use a stud finder.) 6. Use the included hardware for mounting purposes. This hardware has been provided to ensure a safe and secure mount. 7. Hire a licensed electrician to relocate an electrical outlet, if needed. 8. Be sure to purchase wires long enough to connect the TV to the audio and video components in your installation. Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the model number. This number is located on the product. Model No Purchase Date Dealer/Address/Phone Preparing to install Before beginning the installation process, verify that you have all the necessary tools on hand. The following tools are required for proper installation: Tools Phillips Head Screwdriver Ratchet or Driver with 13 mm (1/2") Socket Electric or Portable Drill 6 mm (1/4") Drill Bit and Stud Finder for Drywall Installation 10 mm (3/8") Masonry Bit for Concrete Installation Package Contents Wall Plate (x1) Mount Arm (x2) Safety Bar (x1) Instruction Manual (x1) Hardware Kit (x1) Para obtener instrucciones en español, consulte la página 4. Pour des instructions en français, se reporter à la page 7. Continues on next page... 1